![background image](http://html.mh-extra.com/html/nec/wmk-3298t/wmk-3298t_manual_251045002.webp)
2
2019-12-18 #:126-9246-3 (2020-03-02)
ENG - This product is designed to be installed on wood stud, solid concrete or cinder block walls. Hardware is
included for wood stud, solid concrete and cinder block installation. Before installing make sure the supporting
surface will support the combined load of the equipment and hardware. Screws must be tightly secured. Do
not overtighten screws or damage can occur and product may fail. Never exceed the Maximum Load Capacity.
Always use an assistant or mechanical lifting equipment to safely lift and position equipment. This product is
intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury. Be
careful not to pinch fingers when operating the mount. For support please call customer care at 1-800-865-2112.
WARNING
Symbols
ENG
WARNING
ENG
#
Skip to step.
ENG
Display center.
ENG
x3
Screws must get at
least three full turns
and fit snug.
ENG
Do not overtighten screws.
ENG
Tools Needed for Assembly.
ENG
1
2
ENG To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
4
+1/2
3
5/32"
(4mm)
5/16"
(8mm)
3/8"
(10mm)
Содержание WMK-3298T
Страница 1: ...1 2019 12 18 126 9246 3 2020 03 02 ENG 32 98 82 249 cm 210 lb 95 kg MAX WMK 3298T NEC DISPLAY SOLUTIO ...
Страница 14: ...14 2019 12 18 126 9246 3 2020 03 02 4 6 5 Tighten ENG M ...
Страница 15: ...15 2019 12 18 126 9246 3 2020 03 02 7 Tighten ENG Pre set tilt positions of 5 0 5 10 or 15 ENG 15 5 ...