37
3. Projecting an Image (Basic Operation)
3. Touch the center of the mark lightly with the electronic pen.
The [Parallel Detect] screen will be displayed.
Touch
When the marker is in the center of the gauge, go to Step
6
.
When the marker is not in the center of the gauge, it means that the projector and the screen are not parallel to
each other. Go to Step
4
.
4. Rotate the projector right or left so that the projector is parallel to the screen.
Screen
Screen
Top view
[The marker is on the left side]
[The marker is on the right side]
Rotate the projector right.
Rotate the projector left.
5. Touch the [Retry] button with the electronic pen.
Repeat Steps 2 to 4.
6. When the marker reaches the center of the gauge, press the button "A" on the electronic pen.
The [Tilt Indicator] screen will be displayed again.
Button “A”
7. Press the EXIT button three times.
The menu will be closed.
