NEC VERSA 6220 - SERVICE, Руководство пользователя

Страница: 48 / 199

2-10 Introducing the Software
How to Use LapLink
Follow these steps to get started using LapLink. Once you have LapLink up
and running, refer to LapLink’s online help for more information.
Start the LapLink Traveling software as follows:
1.
In Windows 95 or Windows NT, press
Start
, slide the cursor over to
Programs, and locate the LapLink folder. In the folder, highlight the
LapLink line and press the VersaGlide selection button or tap the Ver-
saGlide pad once.
If you do not have a port enabled, LapLink prompts you to enable one.
Press
Yes
to do so and follow the on-screen instructions to configure the
port. Otherwise, press
No
.
2. Once your ports are configured, select your communication method by
pressing the appropriate button. The buttons give you the following con-
nection options. (Balloon help displays each button’s function.)
„
Connect over cable
„
Connect over wireless
„
Connect over modem
„
Connect over network
„
Connect over dial-up network
Once communication is established between systems, the LapLink win-
dow is displayed.
3.
Select the procedure you want to use by pressing one of the last three
buttons in the LapLink toolbar at the top of the screen. (Balloon help
displays each button’s function.)
„
Press the file transfer button to transfer files between systems.
„
Press the Remote Control button to exercise control over a remote
system.
„
Press the Chat button to converse with another user at the remote
system.
4. When you finish, press the disconnect button to break the link between
the local and remote systems. Press
OK .