3-14 Setting Up and Using the Software
3.
To change a setting, type the number that appears in
front of the option and press
Enter
.
Specify a new setting from the options displayed.
4.
When done, select
4
to quit and use your DOS-based
application.
Option Configuration
Follow the instructions that come with your option to con-
figure devices installed in the Docking Station 4000.
If your NEC Versa BIOS, its operating system, and the
option are all Plug and Play-compliant, you should be able
to install the option, reboot your system, and use the option.
Check the documentation that came with the optional
device, to determine whether or not the option requires
special drivers. If it does, load the drivers according to the
instructions that come with the option.
Configure non-Plug and Play options according to the
instructions that came with the options and those in the
NEC Versa user’s guide. If you install non-Plug and Play
devices in a Plug and Play system, you must still configure
the option according to its requirements.
For some options, like a second IDE drive or diskette drive
installed in the docking station, you must run the Setup
utility or the Automatic Configuration Utility (ACU) to set
the correct parameters. Some systems automatically detect
the new device and its parameters. Check that the settings
reflect the options installed in the docking station.
Drivers
If your NEC Versa is running Windows 95 or MS-DOS
Version 6.0 or above, your system supports multiple con-
figurations. See the next section for driver information.
