manualshive.com logo in svg

NEC VERSA 4000 BATTERY CHARGER WITH AC ADAPTER, Руководство пользователя

Поделиться
Скачать
NEC VERSA 4000 BATTERY CHARGER WITH AC ADAPTER Скачать руководство пользователя страница 15

 

  

 Introducing the NEC Docking Station 4000   1-7

 Status LEDs

n

 

Docking Status – lights green and red

 

Steady Green – When the Main Power Switch is
turned on, no NEC Versa is docked, and the lock is
unlocked, this LED lights steady green indicating
that it is ready for docking.

 

Blinking Green – If docking or undocking is unsuc-
cessful due to an error or jam, the LED blinks.

 

Steady Red – Once the NEC Versa docking process
completes successfully, the LED lights a steady red.

n

 

Hard Disk Drive Access – lights green when a hard disk
drive in either the NEC Versa or the docking station is
being accessed.

n

 

Diskette Drive Access – lights green when a diskette in
the NEC Versa is accessed.

n

 

NEC Versa Battery – lights green

 

Steady green – when the notebook battery is
charging.

 

Содержание VERSA 4000 BATTERY CHARGER WITH AC ADAPTER













































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды