NEC UX5000, Руководство пользователя

Страница: 433 / 588

Customize
Mailbox Options: Network: [Network]
UX Mail Manual Chapter 3: Programming
◆
415
3
[Network]
Network Prefix Number
If the system to which network messages will be delivered for this mailbox is located in another country, use
this option to enter the International Dialing Prefix (e.g., 011). If the remote system is installed in North
America, this entry should be None (
N ).
●
See Networking (AMIS) on page 236 for more.
Options
● Digits (9 maximum, using 0-9, # and *)
●
N (None)
● A (Analyzed pause)
This command waits for 4 seconds, and then continues if busy tone or reorder tone are not detected.
● F (Flash)
This command hook flashes the voice mail port, which places it on Hold.
- To set the duration of the Flash, go to
[T
IMERS
] F
LASH
T
IMER
(
PAGE
474)
.
●
M (Monitored pause)
This command waits for 2 seconds, and then continues if busy tone or reorder tone are not detected.
●
P (Pause)
This command waits for 2 seconds and then continues. You can enter a pause command anywhere in
the dial string.
● S (Wait for sound)
This command waits 2 seconds for any constant sound (such as non-standard dial tone), and continues
if sound is detected.
●
W (Wait for dial tone)
This command waits for CO dial tone, and then continues.
Default
✔
N (None)
[Network]
Network Country Code
If the system to which network messages will be delivered for this mailbox is located in another country, use
this option to enter the Country Code for that location (e.g., 353 for Ireland). If the remote system is installed
in North America, this entry should be None (
N ).
● See Networking (AMIS) on page 236 for more.
Options
●
Digits (4 maximum, using 0-9, # and *)
● N (None)
Default
✔
N (None)
[Network]
Network Area Code
Use this option to enter the area code for the system to which network messages from this mailbox will be
delivered. For example, if the remote system is located at 203-926-5400, enter 203 for this option.
● See Networking (AMIS) on page 236 for more.
Options
● Digits (4 maximum, using 0-9, # and *)
● N (None)
Default
✔
N (None)