NEC UX5000, Руководство по быстрой настройке

Страница: 29 / 68

Chapter 2 - MH240 Setup
Chapter 2 2 - 5
WPA2-PSK : Factory Default: WPA2-PSK (1.NEC-SETUP), OPEN (2 to 9)
1. Press
3 (Security)
to go to the Security setting screen.
2. Press
▲
▼
to select “WPA2-PSK” and then press the round
OK
key.
3. Press
▲
▼
to select an encryption “1.TKIP” or “2.AES” and then press the round
OK
key.
4. Edit the TKIP or AES Key (ASCII) and then press the “
OK
” soft key.
5. Press
HOLD
as needed to exit back to the Pro fi le Setting ( Prof. Setting ) screen.
6. Continue with the next feature or press the
Power/On-Hook
key and
2
to save.
Pressing the Power/On-Hook key and 1 will cancel any entered changes.
WPA: PEAP: Factory Default: WPA2-PSK (1.NEC-SETUP), OPEN (2 to 9)
1. Press
3 (Security)
to go to the Security setting screen.
2. Press
▲
▼
to select “WPA” and then press the round
OK
key.
3. Press
▲
▼
to select an encryption “1.TKIP” or “2.AES” and then press the round
OK
key.
4. Press
1 (EAP) + 2 (PEAP)
to set EAP type to PEAP.
5. Press
2 (Identity)
to go to the Identity edit screen.
6. Edit the Identity and then press the “
OK
” soft key.
7. Press
4 (Password)
to go Password edit screen.
8. Edit the Password and then press the “
OK
” soft key.
9. Press
5 (CA Cert.) + 1 (Set Cert.)
then “
OK
” to set CA Certi fi cate (cacrt.pem).
10. Press
HOLD
as needed to exit back to the Pro fi le Setting ( Prof. Setting ) screen.
11. Continue with the next feature or press the
Power/On-Hook
key and
2
to save.
Pressing the Power/On-Hook key and 1 will cancel any entered changes.
NOTE: You should upload CA Certificate “cacrt.pem” to MH240 in advance by using IP
Phone Manager for MH240.