NEC Univerge SV9100, Общее описание устройства

Страница: 99 / 190

Issue 2.0
SV9100 General Description Manual 2-61
Programmable Function Key and Service Code Available for Personal Park
The Personal Park feature is enhanced by using a Programmable Function Key or
service code (3-digit or 1-digit) to place a call in Personal Park. This option is
available for multiline terminals, single line sets, and UNIVERGE SV9100 Wireless
telephones and can be used for analog or ISDN trunks.
Personal Park at a Co-Worker’s Extension
The Personal Park feature allows an extension user to place an outside
call, which is on hold, on Personal Park at a co-worker’s extension after
placing an intercom call. This feature is available for keysets, SLTs, IP
terminals and IP DECT terminals.
PBX Compatibility
You can connect your telephone system trunks to Centrex/PBX lines, rather than to
Telco trunk circuits. This makes the trunk inputs into the system 500/2500 type
compatible Centrex/PBX extensions, rather than Telco circuits. PBX Compatibility
lets the system be a node (i.e., satellite) in a larger private telephone network. To
place outside calls when the system is behind a PBX, telephone system users must
first dial the PBX trunk access code (usually 9).
The system provides the following PBX Compatibility options:

PBX Trunk Access Code Screening
The system can monitor the numbers users dial and screen for PBX trunk access
codes. The system can screen for up to four groups of trunk access codes. The
codes can have one or two digits, consisting of the digits 0~9,
#
and

. (You can
use Line Key 1 as a wild card entry.)

PBX Trunk Toll Restriction
The system can provide the Toll Restriction for the PBX trunk, or restriction can be
handled solely by the connected PBX. If the telephone system provides the
restriction, it restricts the digits dialed after the PBX access code.

PBX Call Restriction
When the telephone system does the Toll Restriction, it can further restrict users
from dialing PBX extensions. In this case, the only valid numbers are those dialed
after the PBX trunk access code. The only PBX facilities telephone system users
can access are the PBX outside trunks.

Automatic Pause
The system automatically pauses when it sees a PBX trunk access code during
manual dialing, Speed Dialing, Last Number Redial, Repeat Redial and Save
Number Dialed. This gives the connected PBX time to set up its trunk circuits.
PC Programming
The UNIVERGE SV9100 has three different methods for programming. The first is
via the handset, the second is by PCPro and third by WebPro.