NEC UNIVERGE NEAX 2000 IPS, Руководство пользователя

Страница: 80 / 244

CHAPTER 2 INSTALLATION
– 70 –
NWA-008855-001 Rev.1.0
avch2001.fm
STEP3:
Register the data.
By the command registration, the data is assigned and read.
Finally, reboot the IP-CS and load
the assigned data.
(a) Set the use of DHCP server to off.
NOTE: Default data is set as the use of DHCP server is “on” so invalidate the use of DHCP server.
Command: set dhcp off
The “set done” message is indicated when the IP-CS has received the assigned data normally.
Assigned data can be read by entering “show dhcp” command. Default data is “on” (DHCP sever
is available to use).
(b) Set IP Address and Subnet Mask of IP-CS
Command: set ipadr
Example:
IP Address: 10.41.207.20
Subnet Mask: 255.255.255.0
The “set done” message is indicated when the IP-CS has received the assigned data normally.
When the data can be read by entering “show ipadr” command.
IPCS-Connect OK!!
>set dhcp off
set done
>set ipadr 10.41.207.20 : 255.255.255.0
SETUP OF IP-CS