NEC UNIVERGE NEAX 2000 IPS, Руководство пользователя

Страница: 120 / 244

CHAPTER 3 SYSTEM DATA PROGRAMMING
– 110 –
NWA-008855-001 Rev.1.0
avch3001.fm
DESCRIPTION DATA
Specify the Type of Service (TOS) field prece-
dence of the control packet for the IP-CS-to-
system to each location number.
NOTE:
The TOS between the IP-CS and the
system is determined by this data
setting.
•
(1)
(2)
Y=14
00-63: Location No. assigned by CMAD
Y=29
00-7 : PRECEDENCE 0-7 for control
packet
NONE : 6
Specify the DiffServ Code Point (DSCP) of the
control packet for IP-CSs to each location
number assigned by CMAD Y=29.
[Series 3200 R6.2 software required]
NOTE: The TOS field precedence that is set
by CM67 Y=14 is invalid when this
data is set.
•
(1)
(2)
Y=15
00-63: Location No. of group
00-FF
: DSCP of control packet for IP-
CS
NONE : C0
Assign the IP-PAD group number to the loca-
tion number assigned by CMAD Y=29.
[Series 3100 software required]
NOTE: This data is available only for the
IP-PAD (PN-32IPLA/PN-32IPLA-
A).
•
(1)
(2)
Y=18
00-63: Location No.
00-31
: IP-PAD Group No.
NONE : IP-PAD Group No. 00
Specify the priority of the IP-PAD channel to
the location number assigned by CMAD
Y=29.
NOTE 2, NOTE 3
[Series 3100 software required]
NOTE 1:
When no 16VCT card is mounted,
set the 2nd data to 00 or 02.
•
(1)
(2)
Y=19
00-63: Location No.
00
: Give priority to IP-PAD channel
without 16VCT
01 : Give priority to IP-PAD channel
with 16VCT
02 : Use only IP-PAD channel with-
out 16VCT
NONE : Use only IP-PAD channel with
16VCT
NOTE 2:
When using only PN-8IPLA (IP-PAD) card in the system, follow the initial data setting.
When using PN-8IPLA (IP-PAD) card and PN-32IPLA/PN-32IPLA-A (IP-PAD) card in
the system, you must not set the second data to 02 (use only IP-PAD channel without
16VCT). PN-8IPLA card is equal to the IP-PAD channel with 16VCT.
G
CM67
H
CS DATA PROGRAMMING