NEC UM383WL Скачать руководство пользователя страница 103

Страница: 103 / 122

7. Maintenance

WARNING

• Please

not

use

spray

containing

flammabl

gas

remove

dust

attached

the

filter

etc.

Doing

may

result

fires

NOTE: The message for filter cleaning will be displayed for one minute after the projector is turned on or off. When the message is displayed,

clean the filters. The time to clean the filter is set to [

000 H] at time of shipment.

To cancel the message, press any button on the projector cabinet or the remote control.

clean

the

filter

detach

the

filte

unit

and

the

filte

cover.

CAUTION

• Before

cleaning

the

filters

turn

off

the

projector,

disconnect

the

power

cord

and

then

allow

the

cabinet

cool.

Failure

can

result

electric

shock

burn

injuries.

1. Press down two buttons and then pull the filter cover towards

you to open it.

Vacuum dust on the front and back faces of the filter unit.

• Get rid of dust in the filter.
• Gently get rid of dust on the filter cover and in the accordion

pleats of the filter.

NOTE:
• Whenever you vacuum the filter, use the soft brush to vacuum. This is to avoid

damage to the filter.

• Do not wash the filter with water. Doing so can result in filter clogging.

Filter cover

Filter unit

Filter cover

❶

Cleaning the Filter

The filter at the intake vent keeps dust and dirt from getting inside the projector. If the filter is dirty or clogged, your

projector may overheat.

This section describes the simple maintenance procedures you should follow to clean the filter, the projection

win

dow, and the cabinet.

Содержание UM383WL



























































































































Результаты поиска

Содержание UM383WL

Отзывы:

Похожие инструкции для UM383WL

Бренды по названию

Популярные бренды

NEC UM383WL, Руководство пользователя

Результаты поиска

Содержание UM383WL

Отзывы:

Похожие инструкции для UM383WL

Бренды по названию

Популярные бренды