NEC SV8500, Руководство пользователя

Страница: 1647 / 3438

VOL.2-1394
MG-SIP128 [MG-128SIPMGG]
Note:
Assign this command adjusting to the specifications on the SIP network where MG-SIP128 [MG-
128SIPMGG] connects.
(36) ppi_to_pai
Setting of PAID transmission function
This command is used to enable/disable P-Asserted-Identity header (PAID) to be transmitted instead of
P-Preferred-Identity header (PPID).
[Setting Example]
Note: SIP messages can be sent by converting P-Preferred-ID header (PPID) to P-Asserted-ID header
(PAID) only when P-Preferred-ID header (PPID) is used for either of the following settings:
- Enable “privacy_pattern” command and specify “2: RFC3323/3325(P-Preferred-ID/Privacy)”.
- Enable “name_display” command.
(37) pre_negotiation_port_no
Setting of the UDP port receiving packets for voice control path
This command is used to specify the UDP port number that receives packets regarding the voice control
path.
Select function to add 100rel to Supported
Header.
0=enable(default)
1=disable
Input:0
0: enable (Default)
1: disable
Select function to stop cyclical-send of
Provisional Response.
0=disable(default)
1=enable
Input:0
0: enable 18x cyclical-send
1: disable 18x cyclical-send
MG(SIP) > set ppi_to_pai
Select the setting that P-Asserted-
Identity is transmitted instead of P-
Preferred-Identity.
0 = disable (default)
1 = enable
Input:1
0: disable (Default)
1: enable