NEC SuperScript 1450, Руководство пользователя

Страница: 27 / 113

Software for Windows NT 4.0 27
INSTALLING THE SOFTWARE
S
OFTWARE
FOR
W
INDOWS
NT 4.0
Removing Printer Software
Different methods are used for removing the printer drivers
and Status Monitor from computers running Windows 95 or
98.
To remove a printer driver:
1.
Click the Windows Start button, point to Settings, then
select Printers to open the Printers window.
2. Select the printer driver you want to remove.
3. From the File menu, select Delete, and a confirmation
will appear.
4. Click Yes to confirm.
To remove the Status Monitor, PCL6, and PCL5e driver:
1.
Click the Windows Start button, point to Programs, then
to NEC SuperScript 1450, then select
NEC SuperScript 1450 Uninstaller
and a confirmation
message will appear.
2. Click Yes to begin removing the software from your
computer.
S
OFTWARE FOR
W
INDOWS
NT 4.0
Software for computers running Windows NT 4.0 is in the
form of three printer drivers: the PCL6, PCL5e, and the
Windows PostScript printer driver. All three can be installed
from the SuperScript 1400 Series Solutions CD.
NEC recommends using the PCL6 driver because of it’s
advanced features. Use the PCL5e driver for legacy
applications. If the PostScript 2 Upgrade Kit has been
installed in the printer, use the Windows Postscript driver.
Installing the Software
Installing a PCL6, PCL5e, or Windows PostScript driver
involves inserting the SuperScript 1400 Series Solutions CD
into your computer and following the instructions displayed
on the monitor. During the install, you can choose which
driver you want to install.
note:
To use the Windows PostScript printer driver, the
NEC PostScript Level 2 Upgrade Kit (Order No. 1802) must
be installed into the printer. See Chapter 8, “Printer
Options,” for more information.
To install printer software for Windows NT 4.0:
1.
Turn on your computer and wait until the desktop
appears.
2. Turn on the printer and wait until
READY
appears on the
Operator Panel display.
3. Insert the SuperScript 1400 Series Solutions CD into your
computer.
note:
If the NEC SuperScript 1400 Series Solutions CD
Installer appears on the monitor shortly after the disk is
inserted, go to Step 6, if not, go to Step 4.
4. From the desktop, double-click My Computer to open
the My Computer window.
5. Double-click the NEC SS1450 icon to start the installer.
As an alternative, right mouse button click on NEC
SS1450
then select Open or Autoplay to start the
installer. If neither one of these methods work, double-
click Setup.exe which is located on the CD.
note:
To install a PostScript printer driver, select NEC
1450 PS Printer Driver when the Select Components
dialog box appears. Later, when the Add Printer Wizard
appears, click the Have Disk button then navigate the
SuperScript 1400 Series Solutions CD to the appropriate
directory to get the PostScript installation file. Depending
on your operating system, navigate to the following
directory.
• \Ss1450\Diskette\Winnt4\Ps
Removing Printer Software
To remove a printer driver from Windows NT 4.0:
1.
Click the Windows Start button, point to Settings, then
select Printers to open the Printers window.
2. Select the printer driver you want to remove.
3. From the File menu, select Delete, and a confirmation
will appear.
4. Click Yes to confirm.
S
OFTWARE FOR THE
M
ACINTOSH
This section describes the hardware and software
requirements for Macintosh computers, and how to install
the printer software.