NEC Storage Manager IS015-9E Скачать руководство пользователя страница 74

Страница: 74 / 200

Chapter 3 Replication Management

Unexecutable Information

Measure

Have Unpaired

Execute it for a volume with the pair setting.

Foreground Copy State Execute it for a volume in the Suspend state.

Separate State

Execute it for a volume in the Suspend state.

Freeze

Defreeze the Data Replication function and execute it again.

MV Monitoring
Suspended

Change the disk array of MV to the Monitored state and execute it
again.

RV Monitoring
Suspended

Change the disk array of RV to the Monitored state and execute it
again.

MV Force Unpaired

Perform Forced Unpair for RV.

RV Force Unpaired

Perform Forced Unpair for MV.

RV Forced Separate

Execute it for a volume in the Synchronous state.

MV Outside iSM
Management

Execute it for a pair under the iSM management.

All Link Path Abnormal Refer to 2.2.2 (2) “Link fault” in the “Data Replication User’s

Manual (Installation and Operation Guide for Windows)” to recover
from the failure.

Have been registered to
ATgroup

Execute it for a pair that is not registered in the AT-group.

(ii) Summary Display/Details Display

For more information on this item, refer to 3.2.6 “Information Displayed on Execution Dialog”.

(iii) Copy

Mode

You can specify the copy control state when copy is resumed.

The following copy modes can be specified.

Radio Button

Description

Synchronous

Changes the copy control state to the foreground copy (Synchronous)
mode.

Semi-synchronous

Changes the copy control state to the foreground copy
(Semi-synchronous) mode. This can be specified for pairs in
different disk arrays.

Background Copy

Changes the copy control state to the Background Copy state.

When you click the [Execute] button, the following message is displayed.

Figure 3-24 Confirmation Screen

Содержание Storage Manager IS015-9E









































































































































































































Результаты поиска

Содержание Storage Manager IS015-9E

Отзывы:

NEC Storage Manager IS015-9E, Руководство пользователя, Страница: 74 / 200

Результаты поиска

Содержание Storage Manager IS015-9E

Отзывы: