NEC SIGMABLADE N8406-019, Руководство пользователя

Страница: 125 / 147

- 125 -
Changing the setting
3.
Login to the console of the FC Switch Module to change the setting.
„
Changing the Principal Selection Mode can be performed only on the FC
Switch Module logged in.
4.
Type " fabricprincipal –f 1" on the console screen.
„
Any commands used on the switch console should be specified with
lowercase letters.
„
Type “fabricprincipal” command with option “-f” and “1”, then the Principal
Selection Mode of the FC Switch Module that the command is executed is
changed to “Enable” and a Fabric reconstruction to change the FC Switch
Module to the Principal switch is performed.
„
The number of the FC Switch Module to set Principal Selection Mode “Enable”
in the Fabric must be only one.
WH040001124:admin> fabricprincipal -f 1
Principal Selection Mode enabled (Forcing fabric rebuild)
WH040001124:admin>
5.
Type “fabricprincipal” on the console screen to check that the Principal Selection Mode is “Enable”.
WH040001124:admin> fabricprincipal
Principal Selection Mode: Enable (Switch currently principal)
WH040001124:admin>
„
If above message is not displayed as a result of the command, execute
“fabricprincipal –f 1” command again.
WH040001124:admin> fabricprincipal -f 1
Principal Selection Mode enabled (Forcing fabric rebuild)
WH040001124:admin>
6.
Type “switchshow” on the console screen to check that the switchRole is displayed “Principal” in the
message of result.
WH040001124:admin> switchshow
switchName: WH040001124
switchType: 43.2
switchState:
Online
switchMode: Native
switchRole: Principal
switchDomain: 3 (unconfirmed)
switchId: fffc03
switchWwn: 10:00:00:05:1e:03:32:3a
zoning:
OFF
switchBeacon: OFF
(Omitted)