NEC PX750U Series страница 115 Скачать руководство пользователя

Страница: 115 / 243

3. Convenient Features

Viewing Two Pictures

1. Press the PIP button on the remote control.

The PIP/PICTURE BY PICTURE SOURCE screen will be displayed.

2. Use the





button to select the source and press the ENTER button.

The PIP screen or PICTURE BY PICTURE screen will be displayed, depending on which was selected in the

[MODE] setting screen.

3. Press the PIP button again to return to the normal screen (single picture).

TIP:

• Selecting another source will return to the normal screen.

• Selecting a source not supported for the main picture or the sub picture will return to the normal screen.

[POSITION]

This option allows you to select the position of a sub picture in the main picture.

NOTE:

• The default setting is [BOTTOM-RIGHT].

Use the





button to select the sub picture’s position and press the ENTER button.

The options are: TOP-LEFT, TOP-RIGHT, BOTTOM-LEFT, and BOTTOM-RIGHT.

The following adjustments and settings are available for the main picture only.

- Adjusting picture
- Magnifying a picture

The following operations are available for both the main and sub pictures.

- Picture mute
- Freezing a moving picture

Содержание PX750U Series




















































































































































































































































Результаты поиска

Содержание PX750U Series

Отзывы:

Похожие инструкции для PX750U Series

Бренды по названию

Популярные бренды

NEC PX750U Series, Руководство пользователя

Результаты поиска

Содержание PX750U Series

Отзывы:

Похожие инструкции для PX750U Series

Бренды по названию

Популярные бренды