NEC PV800UL-W, Важная информация

Страница: 7 / 64

EN-5
WARNING
Do not place objects in front of the lens while the projector is operating.
PROHIBITED
• Do not leave the lens cap on the lens while the projector is operating. The lens cap could get hot and be warped.
• Do not place objects in front of the lens that obstruct the light while the projector is operating. The object could get hot and
be broken or catch fire.
• The below pictogram indicated on the cabinet means the precaution for avoiding to place objects in front of the projector
lens.
CAUTION
FOR HIGH
TEMPERATURE
When cleaning the projector
PROHIBITED
• Do not use flammable gas sprays to remove dust from the lens, cabinet, etc. Doing so could lead to fire.
About cable cover (separately sold)
REQUIRED
• Be sure to tighten the screws after attaching the cable cover. Failure to do so may cause the cable cover to come off and fall,
resulting in injury or damage to the cable cover.
PROHIBITED
• Do not put bundled cables in the cable cover. Doing so may damage the power cord, resulting in a fire.
• Do not hold the cable cover while moving the projector or do not apply excessive force to the cable cover. Doing so may
damage the cable cover, resulting in injury.
Do not use in high security locations.
PROHIBITED
• Usage of the product must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury,
severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and
missile launch control in a weapon system.
CAUTION
Power supply
Connecting the power cord to earth
REQUIRED
• This equipment is designed to be used in the condition of the power cord connected to earth. If the power cord is not con-
nected to the earth, it may cause electric shock. Please make sure the power cord is connected to the wall outlet directly and
earthed properly.
Do not use a 2-pin plug converter adapter.
• Be sure to connect the projector and the computer (signal source) to the same earth point. If the projector and the computer
(signal source) will be connected to different earth points, fluctuations in the earth potential may cause fire or smoke.
Handling the power cord
REQUIRED
• When connecting the power cord to the projector’s AC IN terminal, make sure the connector is fully and firmly inserted. Be
sure to fix the power cord using the power cord stopper. Loose connection of the power cord could lead to fire or electric
shock.
DO NOT TOUCH
WITH WET
HANDS
• Do not connect or disconnect the power cord with wet hands. Doing so could result in electric shock.
UNPLUG THE
POWER CORD
• When cleaning the projector, for safety purposes unplug the power cord from the power outlet beforehand.
• When moving the projector, first be sure to turn off the power, unplug the power cord from the power outlet and check that
all connection cables connecting the projector to other devices have been disconnected.
• When planning not to use the projector for long periods of time, always unplug the power cord from the power outlet.