NEC PCN-1815SSQN/1Cx2, Инструкция по эксплуатации, Страница: 98 / 110

GWP-G22906
•
Indicator
<1> REMOTE : Indicates the Remote mode. (Amber indication)
<2> LOCAL : Indicates the LOCAL mode. (Red indication)
<3> TX ON : Transmitter is in ON status. (Amber indication)
<4> POWER-A/B : Indicates the TX Control is power on.
(Amber indication)
<5> INTERLOCK : The output power of the transmitter can be
applied to external equipment. (Green indication)
<6> WARNING : Some warnings occur in the Transmitter.
(Amber indication)
<7> TX ALARM : Some alarms occur in the Transmitter.
(Red indication)
<8> CPU ALARM : Indicates the CPU is fault condition.
(Red indication)
*1
<9> EX-A : Indicates the Exciter-A is in use.
(Amber indication)
*1
<10> EX-B : Indicates the Exciter-B is in use.
(Amber indication)
*2
<11> PUMP-A : Indicates the Pump-A is in use.
(Amber indication)
*2
<12> PUMP-B : Indicates the Pump-B is in use.
(Amber indication)
*3
<13> H.EXC-A : Indicates the H.EXC-A is in use.
(Amber indication)
*3
<14> H.EXC-B : Indicates the H.EXC-B is in use.
(Amber indication)
Note) *1 : Provided only when the exciter control is of changeover type of passive
reserve exciters.
*2 : Provided only when the control of pumps is of changeover type of passive
reserve pumps.
*3 : Provided only when the control of heat exchangers is of changeover type
of passive reserve heat exchangers.
4 - 10