NEC Packard Bell EasyNote G5, Руководство по разборке

Страница: 12 / 27

NEC Versa E6000/PB Easy Note G5 Disassembly Manual
Page 12
Removing the LCD Module
To remove the LCD Module first remove the battery (see Removing the Battery ) and remove
the Keyboard (see Removing the Keyboard ) then perform the following steps:
3. Remove the screws retaining the Heat Plate as shown in Fig. 12
Fig. 12 Removing the screws retaining the Heat Plate
4. Flip over the base unit and release the screws retaining the LCD Module.
Fig. 13 Removing the screws retaining the LCD Module
5. Release the screws on the system rear side as shown in Fig. 14
Fig. 14 Removing the screws retaining the LCD Module
M2.5 x 5 Silver
M2.5x9 Silver
M2.5x9 Silver