Installing an Expansion Drive
Install the Drive
Issue 1-0
◆
1
Install the Drive
Installing an Expansion Drive
Introduction
This supplement provides instructions for installing an expansion (slave) drive in the NVM-2000
Tools and Materials Needed
■
ESD Wrist Strap (to be worn on wrist and attached to a grounded metal object at all times)
■
Phillips-head screw driver
■
Diagonal cutters
■
Monitor and keyboard connected to NVM
■
Expansion Hard Drive with two U brackets
Install the Drive
To install the expansion drive:
Note:
Instructions assume you are using the Full Screen Editor.
1.
From the
Main Menu
, select
Exit
.
2.
Type the system password and press
<Enter>
.
3.
Select
Shutdown Voice Mail System
to shut down the Voice Mail.
4.
At the prompt,
Are you sure you want to SHUT DOWN the Voice Mail System (Y/N)?
, enter
Y
.
5.
After the Voice Mail shuts down, turn off the system power and remove the power cord.
6.
Remove the monitor cord and the keyboard cord from the NVM cabinet.
7.
From the rear of the cabinet, remove the 5 hex-head screws that secure the cover to the cabinet.
See Figure 1. (The back of your cabinet may appear differently from the one shown).
Figure 1
WARNING
Do not turn off the NVM without first shutting it down. If you do not shut
down first, you may corrupt the NVM database when you turn it off.
DT-SPswap1
All manuals and user guides at all-guides.com