Installing an Expansion Drive
Install the Drive
Issue 1-0
◆
7
●
Use Figure 3 as a reference for panel location. To re-attach the front panel to the cabinet,
simply push the spring clips into the holes of the cabinet until the clips snap and lock the
front panel in place.
●
Go to step 13.
14. Disconnect the ribbon cable from the master hard drive.
15. Plug the
end
connector
of the ribbon cable into the
expansion
hard drive. See Figure 12.
Figure 12
IMPORTANT
Insert the connector on the ribbon cable so that the red stripe on the rib-
bon cable is closest to the power connector on the hard drive.
2
0
2
xA
1
8
red stripe
red stripe
Note: For clarity, floppy ribbon cable and
all power wires are not shown.
DT-expHD-13
All manuals and user guides at all-guides.com
all-guides.com
