NEC NP-UM383WL, Руководство пользователя

Страница: 82 / 122

7
2
5. Using On-Screen Menu
Selecting Signal Format [SIGNAL SELECT]
[COMPUTER]
Allows
you to choose [COMPUTER] for an RGB source such as a computer, or [COMPONENT] for a component
video source such as a DVD player. Normally select [RGB/COMPONENT] and the projector automatically detects a
component signal. However there may be some component signals that the projector is unable to detect. If this is
the case, select [COMPONENT].
[VIDEO]
This feature enables you to select composite video standards automatically or manually.
Factory
default setting is [AUTO] and the projector will automatically detect the video standard.
In the case where the projector has difficult detecting the video standard, select the appropriate video standard
from the menu.
Enabling or Disabling WXGA Mode [WXGA MODE]
Selecting [ON] will give priority to WXGA (1280 × 800 )/WUXGA (1920 × 1200) signal s in re cognizing an input signal.
NOTE: [ON] is selected at the time of shipment.
Enabling the deinterlace [DEINTERLACE]
Turns on or off the deinterlace function for a telecine signal.
OFF �������������������������� Select this option if there is any jitter or artifacts in video �
ON ��������������������������� Default standard setting �
NOTE: This feature is not available for HDTV (progressive) and computer signals.
Setting HDMI1, HDMI2 [HDMI SETTINGS]
Make the settings for each video level when connecting HDMI1 equipment such as a DVD player.
VIDEO LEVEL ������������ Select [AUTO] to automatically detect video level � If automatic detection may not work well, select [NORMAL] to
disable the [ENHANCED] feature of your HDMI equipment or select [ENHANCED] to improve image contrast and
increase detail in the dark areas
�
Setting Audio [AUDIO SELECT]
Make the settings for each audio level when connecting HDMI equipment. Select between each equipment and
computer.
HDMI1, HDMI2 �������������� Select [HDMI1] or [HDMI2] to switch the HDMI1 IN or HDMI 2 IN digital audio signal or select [COMPUTER] to switch
the COMPUTER input audio signal
�
Enabling Key Sound and Error Sound [BEEP]
This feature turns on or off the button sound or alarm when an error occurs or the following operations are performed.
- Displaying the main menu
- Switching sources
- Resetting data by using [RESET]
- Pressing POWER ON or STANDBY button
TIP:
• Volume control for [BEEP] is disabled. AV-MUTE button is not effective to stop beeping sound. If you want to activate BEEP function, set
[BEEP] to [OFF].