NEC NP-02HD, Руководство по установке

Страница: 130 / 150

130
LCD Menu
Date/Time
Use this to set the date and time on the projector.
The internal clock in the projector uses coordinated universal time (UTC). This sets the time difference between the standard time
in your region and UTC.
←
Displays the currently setting with asterisk (*).
←
Sets the time difference between the standard time in your region and UTC.
Press the ENTER button to check the time difference between the built-in projector clock
and UTC.
TIP
When IMB is used, the date and time of IMB are automatically used as the date and time of the projector (UTC).
When IMB is not used, the use of DCC allows you to easily set the date and time of the projector by reading the date
and time of the computer where DCC is installed.
To set the local time after selecting the Coordinated Universal Time as the date and time of the projector, use [Date/
Time], or use DCC. Refer to “Digital Cinema Communicator v2 Installation Manual” for details.
Fan Speed Mode
It adjusts the rotation speed of the internal cooling fan.
←
Displays the currently selected item with asterisk (*).
←
Displays the setting.
Auto The fan rotates at the optimal speed according to the temperature sensor inside the projector.
High Speed The fan always rotates at high speed.
Hight Altitude Select the function when using the projector at an altitude of 1600 m (5250 ft.) or higher such as a
place where atmospheric pressure is low. The fan always rotates at high speed.
NOTE
It is recommended that you select “High Speed” if you use the projector non-stop for consecutive days.
Service
Use buttons on the control panel of the projector to display the serviceman menu, which you can use after logging in with Service
privilege.
[SDT Clear]
The password input screen to clear Service Door Tamper is displayed.
←
Pressing the ENTER button displays the password input screen.
← Enter the password.