NEC NLT-40FHD100, Руководство пользователя

Страница: 49 / 64

49
Connection of PC
H-Position / V-Position
This function is to adjust picture to left/right and
up/down as you prefer.
Clock
This function is to minimize any vertical bars or
stripes visible on the screen background. And the
horizontal screen size will also change.
Phase
This function allows you to remove any horizontal
noise and clear or sharpen the image of characters.
Auto
This function is for the automatic adjustment of the
screen position, clock and phase. The displayed
image will disappear for a few seconds while the
Auto-configuration is in progress.
Reset
This function allows you to return to the good pic-
ture reproduction programmed at the factory and
cannot be changed.
WXGA or VGA (Only PC-RGB mode)
a : When the set is inputted WXGA signal, select
the desired WXGA resolution.
b : When the set is inputted 480p signal in VGA
mode, select 480p on the SETUP menu.
Press the MENU button and then D / E button to
select the SETUP menu.
Press the
G
button and then
D / E
button to select
WXGA .
Press the G button and then D / E button to select
the desired resolution.
Press the OK button to store it for the PC monitor
picture.
Press the EXIT button to return to PC mode.
Language
PC Control
WXGA
VGA
Child Lock
Front Light
Cinema Mode
E D G OK MENU
SETUP
1024X768
1280X768
1360X768
1366X768
E D F G OK MENU
SETUP
Language
PC Control
WXGA
VGA
Child Lock
Front Light
Cinema Mode
WXGA
- Some signal from some graphics boards may not function properly. If the results are unsatisfactory,
adjust your monitor’s position, clock and phase manually.
[ Note ]