DOD-PD-1261 (2nd edition)
3
1.3 ATTENTIONS
(1) Do not press or rub on the sensitive display surface. If customers clean on the panel surface, NEC
recommends using the cloth with ethanolic liquid such as screen cleaner for LCD.
(2) When handling the LCD module, take the measures of electrostatic discharge with such as earth
band, ionic shower and so on, because the LCD module may be damaged by electrostatic.
(3) Do not touch with bare hand or dirt the cold cathode fluorescent lamp in the lamp holder. If do so,
display mura might occur.
(4) Do not bend or unbend the lamp cable at the near part of the lamp holding rubber, to avoid the
damage for high voltage side of the lamp.
(5) Properly connect the adaptable plug (backlight side) to socket (inverter side) without incomplete
connection. After connecting, be careful not to hook the lamp cables because incomplete connection
may occur by hooking the lamp cables. This incomplete connection may cause abnormal operation
of high voltage circuit.
(6) Do not hook nor pull cables such as lamp cable, and so on, in order to avoid any damage.
(7) Do not shock and press the LCD panel and the backlight. There is a danger of breaking, because
they are made of glass.
(8) If dirt or dust gets on the cold cathode fluorescent lamp, display mura might occur. Therefore, NEC
recommends using a clean room or clean bench (the class "D" level).
!
Lamp cable
High voltage side of the lamp
Holding rubber
