NEC NEAX2000 IVS, Руководство пользователя

Страница: 76 / 78

CHAPTER 4 ND-46550 (E)
Page 68
Revision 2.0
PN-DAIB (DAIB) RUN lamp is not flashing Abnormal operation of
DAIB card
➀
Reset MB switch.
(Down
→
Up
→
Down)
➁
If fault cannot be cleared,
replace card.
LINK lamp is not on Layer 2 link connection
failure between DAIA and
DAIB
➀
Check whether cable between
DAIA and DAIB is correctly
connected. (Refer to
Chapter 3 ,
Section 2.3 .)
➁
Reset MB switch
(Down
→
Up
→
Down)
RED lamp is on PCM signal loss or Frame
Alignment signal loss
➀
Check whether cable between
DAIA and DAIB is correctly
connected. (Refer to
Chapter 3 ,
Section 2.3 .)
➁
Reset MB switch of DAIA card
on main site.
(Down
→
Up
→
Down)
RMT lamp is on Remote alarm
➀
Check whether cable between
DAIA and DAIB (sending side)
is correctly connected. (Refer
to
Chapter 3 , Section 2.3 .)
Table 4-1 Remedial Action on Each Lamp Status (Continued)
CARD NAME LAMP STATUS FAULT CONTENT REMEDIAL ACTION