NEC NEAX 2400, Руководство пользователя

Страница: 2 / 17

Smooth Operator Configuration Note (77175)
NEC Neax 2400 w/ Direct Serial Link
C o n f i d e n t i a l P a g e 2
The above information is provided by Octel Communications Corporation as a guide.
See disclaimer on page 1
O c t e l C o m m u n i c a t i o n s
3.0 SWITCH HARDWARE REQUIREMENTS
ƒ
NEAX Message Center Interface (MCI) link I/O card I002-A
ƒ
One single line port port for each integrated voice port to be
programmed into a UCD group. (PA-16LCQ is recommended since
it can be programmed to provide loop current detection).
ƒ
NEAX MCI RS 232, requires TTY-CA cable and TTY-CA-1 cable
ƒ
One RJ-14 jack with 4-conductor line cord for every two Sm Oper
ports
ƒ
80 volt power supply for for messaage waiting lights on single line
phones
ƒ
One analog line for remote service access
ƒ
One RJ-11 Jack for above and 2-conductor modular telephone cord.
ƒ
If FaxMail is installed.
- One analog line per FAX port.
- One RJ-11 Jack for every Brooktrout TR-112 fax port OR one
RJ-14 Jack for every two Brooktrout TR-114 fax ports, along
with
4-conductor modular telephone cords.
3.1 SWITCH SOFTWARE REQUIREMENTS
ƒ
NEAX 2400 SIM or IMG 5200
ƒ
NEAX 2400 MMG or UMG 4200 or 5200
Note: Versions prior to 4200 may not provide overflow to UCD, also
there may be problems passing caller information from the MCI
to the Smooth Operator on internal transfers.
4.0 SUPPORTED FEATURES
[ 9 ] Items are supported
System Forward to Personal Greeting Message Waiting
All Calls [ ] LCD Display [
9
]
Ring/no answer [ ] LED [ ]
Busy [ ] Lamp [
9
]
Busy/No Answer [ ] Audible / Stutter Dial Tone [ ]
Do Not Disturb [ ]
Multiple Return to Operator
[
9
]
Station Forward to Personal Greeting Direct Call
[
9
]
All Calls [
9
]
Auto Attendant
[
9
]
Ring/no answer [
9
]
Outcalling
[
9
]
Busy [
9
]
Personal Greeting of Original-Called Party
Busy/No Answer [ ] Multiple Call Forward [
9
]
Do Not Disturb [ ] Double Call Forward [ ]
Flexible Forwarding Call Coverage [ ]
Forward to No Answer Greeting [
9
] Intercom Paging [
9
]
Forward to Busy Greeting [
9
] Supervised Transfers
Intercom/CO Forwarding [ ] Call Screening [
9
]
Call Queuing [
9
]
Switch hardware requirements
Switch software requirements
Supported integration features