NEC NEAX 2000 IVS, Системное руководство

Страница: 52 / 54

CHAPTER 5 ND-45895 (E)
Page 42 Addendum-001
Revision 1.1 JULY, 1997
SPECIFICATIONS
3.4 MCI Stop Message Format (PBX to VMS)
This message format is used to stop receiving a Message Waiting lamp control data from a VMS temporarily.
The data is sent to the VMS in the format shown in Figure 5-5 when the Message Waiting lamp is set or canceled
for all stations in the system.
Figure 5-5 MCI Stop Message Format (PBX to VMS)
Table 5-4 Message Waiting Lamp Control Information
CONDITION STATION 1 DATA STATION 2 DATA DESCRIPTION
1 Station No. Blank Station/MW On/Off
2 Station No. Station No. No control
3 Blank Blank All stations MW On/Off
0 1 2 3 4 5 6 7 8
S S U E
T
X
A A I
E
T
X
15 16 35
Call Type Code (39)
Byte No.
Data
(ASCII)
STX : START OF TEXT
SA : SYSTEM ADDRESS
UA : UNIT ADDRESS
EI : ENTRY INDEX
ETX : END OF TEXT
9
BLANK 3 9 BLANK