CHAPTER 3
ND-45895 (E)
Page 16
Addendum-001
Revision 1.1
JULY, 1997
INSTALLATION
3. REQUIRED EQUIPMENT AND CABLES
Table 3-1
below shows the equipment and cables to be installed.
Note 1:
The equipment or cable marked with “*” should be provided by customer.
Note 2:
When using the RS0-RS2 connector on the PN-AP00 for the MCI, the following RS-232C cable is
required:
• RS RVS-15 CA-A/RS RVS-4 CA-C: for connecting VMS directly
• RS NORM-4 CA-A: for connecting VMS via MODEM
Note 3:
When using the RS3 connector on the PN-AP00 for the MCI, the RS NORM-4 CA-A and RS-232C
Interface Cable are required.
Table 3-1 Required Equipment and Cables
EQUIPMENT/CABLE
DESCRIPTION
QUANTITY
REMARKS
PN-AP00 Card
Interface Card for MCI
1
PN-4LC
Line Circuit Card for VMS
N
RS RVS-15 CA-A/RS RVS-4
CA-C
Connecting cable between PN-AP00 and VMS
1
Cable length:
15 m (49 ft.) max.
/4 m (13 ft.) max.
RS NORM-4 CA-A
Connecting cable between PN-AP00 and MO-
DEM/RS-232C Interface Cable
1
Cable length:
4 m (13 ft.) max.
RS-232C Interface Cable
Connecting cable between RS NORM-4 CA-A
and VMS
1
VMS* Voice
System
1
MODEM* 2
(As required)
Содержание NEAX 2000 IVS
