- 74 -
6> Select
“
Add Boot Devices
”
and press <Enter>.
001: LPe12002-M8-N PCIe2.5Gb/s , x8
LPe12002-M8-N Node Name : 20000090FA211128
Seg#: 000 Bus#: 40 Dev#: 00 Func#: 00
RECONNECT DEVICES
Set Boot from SAN [Disable]
▶
Scan for Fibre Devices
▶
Add Boot Devices
▶
Delete Boot Device
▶
Change Boot Device Order
▶
Configure HBA and Boot Parameters
▶
Set Emulex Adapter to Default Settings
▶
Display Adapter Info
7> A screen appears displaying the discovered targets. Then select the Boot device and press <Enter>.
LPe12002-M8-N Node Name : 20000090FA211128
Here are the discovered targets:
▶
Go to Configuration Main Menu
▶
0001: NEC DISK ARRAY 1000
If no Boot Device can be discovered from this product, confirm the WWPN which
you selected. Refer
“
Appendix B Confirm WWPN addresses after setup
”
to find
this product
’
s WWPN. If you have selected the correct WWPN, confirm that the
Fibre Channel device is properly connected and its settings are all correct. Then,
reboot the computer and try these steps from the beginning.
8> A list of bootable LUNs is displayed. Then select
“
LUN:0000
”
and press <Enter>.
WWN: 21000016 97122446
▶
Return to Previous Page
▶
LUN:0000 Mode: Peripheral dev
▶
LUN:0001 Mode: Peripheral dev
Notice
