Anti-Static Measures
Handling of Optical Disk Drive.
●
Do not leave the tray ejected from the optical disk drive.
●
Do not leave the drive with an optical disc being contained.
●
Clean the disc and drive in regular basis. Be careful not to touch the lens while cleaning the drive.
Reading Time Fluctuation.
●
The optical disk drive has a feature to detect the disc condition and determine the optimum reading speed for the disc. Accordingly, the time
required for reading data may not be constant, depending on disc condition.
4. Specifications
Compatible interface
SATA
Data transfer mode
1.5Gbits/sec
Outside dimensions
128 (width)
ｘ
127 (depth)
ｘ
9.5 (height) mm
Weight
0.2kg or less
Power supply (rating)
DC+5V
Operating environment
(during operation)
Temperature: 10 to 35/40
℃
(It depends on environmental condition of a server.)
Humidity: 20 to 80% (no condensation)
This product utilizes a laser.
CAUTION : Use of control, adjustment or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
Do not open covers and do not repair yourself. Refer servicing to qualified personnel.
.
Este producto utiliza un láser.
PRECAUCIÓN:Si se realiza un ajuste que pueda afectar el nivel de potencia de la emisión láser,
no toque ni ajuste sin la autorización del personal de servicio.
De lo contrario pueden producirse emisiones dañinas de láser a las que quedaría expuesto.
Ce produit utilise un laser.
ATTENTION:Si un ajustement est nécessaire, seul le personnel de service est autorisé à contrôler
le niveau d
’
émission laser. Si vous tentez de le faire vous même, vous risquez de vous
exposer a des émissions laser dangereuses.
Laser properties of the Drive
Laser Class Class 1 (HHS and IEC 60825-1)
Wavelength for CD
783 nm
for DVD 661.5 nm
Location of Labeling
- 15 -
- 16 -
Installing or Uninstalling an Internal Optional Device
1. Notes before carrying out the work
(1) To avoid electric hazard and malfunction, be sure to turn off the Power switch of this product and unplug the power cord from an outlet
before carrying out the work. However, there is no need to do this if the internal optional device is hot-swappable.
(2) This internal optional device consists of static-sensitive electronic components. To avoid failures caused by static electricity when installing
or uninstalling the internal optional device, wear an anti-static wrist strap on your wrist and provide earthing before carrying out the work.
And also connect a wrist strap to earth
ground when you wear a wrist strap.
(3) Handling of cables When connecting a cable (e.g., LAN cable), static electricity may also be charged due to friction against the floor.
Connecting a charged cable with an I/O device may cause damage to the devices. It is recommended to discharge static electricity
before connecting a cable by using neutralization apparatus and so on.
