NEC NC3541L, Руководство по установке

Страница: 45 / 108

55
Setting Up Your Projector
2-5-2. Procedure for connecting the power cable (C1 connection)
Preparation:
Phillips-head screwdriver (No. 2), service key (projector accessory)
WARNING
• Before connecting the power cable, make sure that the AC power supply is disconnected. Otherwise a fire or electric
shock may occur.
• A large leak current flows. Do NOT connect the power supply before grounding connection.
1
Remove the plate inlet.
Remove the plate inlet by loosening the fixing screws (at six points).
In Europe, replace it with the supplied
φ 35 plate inlet.
Plate Inlet
2
Pass the power cable through the cable hole of the plate.
If you use the supplied φ 35 plate inlet, pass the power cable through a commercially available cable stopper and
then insert it into the cable hole.
Cable stopper