NEC N8403-034, Руководство пользователя

Страница: 37 / 47

- 37 -
4-2. Label WWPN address
Label WWPN address and write in “N8403-034” on the Blade management sheet as illustrated
below.
Important
 Confirm that the lower 12 figures of Worldwide Name (WWN) match the IEEE
address, before you label.
Hint

WWPN became visible from outside by labeling WWPN address on the Blade
management sheet.
4-3. Install the CPU Blade
Install the CPU Blade in the Blade Enclosure following the instructions in the user's manual of the
CPU Blade.
Avoid installation in extreme temperature conditions.
Immediately after the CPU Blade is powered off, its internal components such as hard
disks are very hot. Leave the server until its internal components fully cool down before
installing/removing any component.
Connect firmly.
Please connect the product to the CPU Blade firmly. A loose connection can cause a
contact failure and can lead to smoke or fire.
4-4. Installing the Driver
To use this product, the appropriate Fibre Channel driver for your operating system must be installed. For
detailed information, refer to the user's manual of the CPU Blade and “N8403-034 Setup Card” for Fibre
Channel Driver,
CAUTION
WWPN label
The upper line is WWPN for port 0, and the
lower line is for port 1.
CPU Blade
SLOT #
Model Name :
N8400-
No. :
FR :
MAC Address Label
LAN 1 :
LAN 2 :
Option Card Label
HDD
ID：0
ID：1
Option Card Label
P0 10-00-00-00-C9-5B-00-00
P1 10-00-00-00-C9-5B-00-01
N8403-034