NEC N8190-7157A, Руководство пользователя, Страница: 70 / 74

13> A Disable/Enable menu appears. Select “Enable” and press <Enter>.
㻌
ᵱᶃᶒᴾᵠᶍᶍᶒᴾᶄᶐᶍᶋᴾᵱᵟᵬᴾ
ᵢᶇᶑᵿᶀᶊᶃᴾ
ᵣᶌᵿᶀᶊᶃᴾ
14> Confirm that the setting of “Set Boot from SAN” is [Enable].
ᴾ
ᴾ ᴾ ᴾ ᴾ ᵎᵎᵏᵘᴾᵪᵮᶃᵏᵔᵎᵎᵎᵠᵋᵫᵔᵋᵬᴾᵮᵡᵧᶃᵖᵌᵎᵥᶀᵍᶑᴾᵊᴾᶖᵖᴾ
ᴾ ᴾ ᴾ ᴾ ᵪᵮᶃᵏᵔᵎᵎᵎᵠᵋᵫᵔᵋᵬᴾᵬᶍᶂᶃᴾᵬᵿᶋᶃᴾᵘᴾᵐᵎᵎᵎᵎᵎᵗᵎᵤᵟᵐᵏᵏᵏᵐᵖᴾ
ᴾ ᴾ ᴾ ᴾ ᵱᶃᶅᵁᵘᴾᵎᵎᵎᴾᵠᶓᶑᵁᵘᴾᵒᵎᴾᵢᶃᶔᵁᵘᴾᵎᵎᴾᵤᶓᶌᶁᵁᵘᴾᵎᵎᴾ
ᴾ
ᵠᵿᶁᶉᴾᶒᶍᴾᵳᵣᵤᵧᴾᵢᶃᶔᶇᶁᶃᴾᵫᵿᶌᵿᶅᶃᶐᴾᵿᶌᶂᴾᵰᵣᵡᵭᵬᵬᵣᵡᵲᴾᵢᵣᵴᵧᵡᵣᵱᴾ
ᵱᶃᶒᴾᵠᶍᶍᶒᴾᶄᶐᶍᶋᴾᵱᵟᵬᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᵹᵣᶌᵿᶀᶊᶃᵻᴾ
㚔 ᵱᶁᵿᶌᴾᶄᶍᶐᴾᵤᶇᶀᶐᶃᴾᵢᶃᶔᶇᶁᶃᶑᴾ
㚔 ᵟᶂᶂᴾᵠᶍᶍᶒᴾᵢᶃᶔᶇᶁᶃᶑᴾ
㚔 ᵢᶃᶊᶃᶒᶃᴾᵠᶍᶍᶒᴾᵢᶃᶔᶇᶁᶃᴾ
㚔 ᵡᶆᵿᶌᶅᶃᴾᵠᶍᶍᶒᴾᵢᶃᶔᶇᶁᶃᴾᵭᶐᶂᶃᶐᴾ
㚔 ᵡᶍᶌᶄᶇᶅᶓᶐᶃᴾᵦᵠᵟᴾᵿᶌᶂᴾᵠᶍᶍᶒᴾᵮᵿᶐᵿᶋᶃᶒᶃᶐᶑᴾ
㚔 ᵱᶃᶒᴾᵣᶋᶓᶊᶃᶖᴾᵟᶂᵿᶎᶒᶃᶐᴾᶒᶍᴾᵢᶃᶄᵿᶓᶊᶒᴾᵱᶃᶒᶒᶇᶌᶅᶑᴾ
㚔 ᵢᶇᶑᶎᶊᵿᶗᴾᵟᶂᵿᶎᶒᶃᶐᴾᵧᶌᶄᶍᴾ
ᴾ
ᴾ
ᴾ
„
Do not select “Back to UEFI Device Manager and RECONNECT DEVICES”. Press
<Esc>, when you want to return to the adapter list.
15> If any other ports of this product are connected to the Fibre Channel boot device, Press <Esc> key
to return to the adapter list and setting ports by the same steps from 5>.
„
Press <Esc> to return to the adapter list. If select “Back to UEFI Device Manager
and RECONNECT DEVICES” and press <Enter>,
press <Alt>, <Ctrl> and <Del>
keys simultaneously to reboot the computer. Then, start the steps from the
beginning.
16> Now, you have made settings to start installing an operating system on your Fibre Channel device.
Save changes and exit the STEUP utility of the computer, and start installation.
䣐䣱䣶䣫䣥䣧
䣐䣱䣶䣫䣥䣧