NEC N8151-143, Руководство пользователя

Страница: 37 / 56

37
Handling
The following explains how to handle the Internal LTO.
Setting the Data Cartridge
 Make sure that proper data cartridge is used.
 While setting the data cartridge, do not turn off the server. This may cause a
malfunction or the damage data.
1.
Make sure that LED is not blinking
2.
Confirm that the Write Protect Switch is correctly set.
3.
Set the data cartridge orientation with the write protect
switch is this side as shown here.
4.
Insert the data cartridge into the cartridge door slowly.
When the cartridge is inserted at the middle position, it
is automatically installed into the right position
Do not change the position for the write protect switch during the Internal LTO is
installed into the Internal LTO. It may cause the error if the position is changed with
installation.
When the data cartridge is need to be re-installed at the eject position, once the
cartridge is removed from the Internal LTO, then, once again, re-installation will be
done