Move light bar to “Select Physical Disk”, press <ENTER> and a popup menu will appear. Select a
physical disk to operate. Physical disk display format is <Chassis slot: Slot> or <Connector: Enclosure:
Slot>.
Select below operations on the physical disk:
“Start Locate / Blink”
Select and press <ENTER> to start blinking the physical disk.
“Stop Locate / Unblink”
Select and press <ENTER> to stop blinking the physical disk.
Please check whether or not side-band signal cables are needed to Locate / Blink
device LED beforehand.
“Legacy OpROM Boot Device”
It displays whether device is legacy OpROM boot device. Select and press <ENTER>, a popup
menu will appear. Select [Yes] and press <ENTER> enable this feature, [No] and press <ENTER>
to disable it.
Select “Apply Changes” and press <ENTER> to commit changes.
This product don’t support on Legacy BIOS mode, so do not change this setting.
1RWLFH
1RWLFH