2.2. Installation to the server
Do not connect this product to a server or SAS/SATA device that is not
recommended by NEC Corporation. If the product is connected to a server or
SAS/SATA device that is not recommended by NEC Corporation, the product may
malfunction or fail.
Please contact the retailer or service center for the information on recommended
servers, SAS/SATA devices, or SAS/SATA cables.
1. Confirm the power to the server is off (power lamp off), then unplug the power cord from the
electrical outlet.
If the power to the server is on (power lamp on), shut down the operating system
and then turn off the server.
2. Remove the cover and other components of the server if necessary following the instructions in
the user's guide of the server.
3. Install this product in the PCI slot as following the instructions described in the user's guide of
the server.
The method of installing and removing the PCI card and the location of the PCI
slot differ in different servers. Read the user's guide of the server for confirmation.
If this product is not correctly connected to the PCI slot of the server, remove the
product and connect it again. Using excessive force can lead to damage.
1RWLFH
&KHFN
1RWLFH