28
Chapter 1 Overview
First read this chapter if you use the N8103-122 RAID Battery Backup Unit (called Battery
Backup Unit=BBU) for the first time.
This chapter describes the characteristics and configuration of the BBU and outlines the
additional battery installation job.
1. Characteristics of BBU
The BBU is an additional battery exclusively used for the N8103-115 RAID Controller
(called RAID controller hereafter).
Connecting the BBU to the RAID controller can prevent data from being lost due to an
accident including instantaneous power interruption (in the WriteBack mode).
Backup of data in SDRAMs on RAID controller for up to 72 hours
Improvement of reliability in WriteBack mode
Use of rechargeable lithium ion battery
2. Specification
Item
Specification
Remarks
Maximum data backup time
72 hours
Full charging
Outer dimension
80 (width) × 48 (depth) x 13
(height) mm
Excluding battery cable
Weight
Approx. 0.10 kg
Operating voltage
3.7 V or higher
In normal operation
Power consumption
1.85 W
Temperature
10 C to 35 C
Operating
environment
Humidity
20% to 80%
Without condensation
Temperature
0 C to 35 C
Storage
environment
Humidity
20% to 80%
Without condensation
Life (battery back)
About 2 years
Varies depending on
operating environment and
boundary conditions
Содержание N8103-122
Страница 22: ...xx ...
Страница 31: ...9 1 2 バッテリケーブルの接続 ご購入時に バッテリケーブルはバッテリボードに接続されていません RAID コントロー ラに取り付ける前に バッテリケーブルをバッテリコネクタにしっかりと接続してくださ い ...
Страница 45: ...23 10 RAID コントローラを本体装置の PCI スロットに元通りに取り付けてネジ止めします ...
Страница 58: ...36 1 2 Connecting battery cable Connect the battery cable with the battery board firmly ...