manualshive.com logo in svg

NEC N8100-958F, Руководство пользователя

Поделиться
Скачать
NEC N8100-958F Скачать руководство пользователя страница 270

9-16  Upgrading Your Server

 

6. 

Connect two power cords.

Use the power cord provided with the standard power supply unit and the one provided
with the optional unit. The AC POWER lamps flash when the power cords are connected.

 

7. 

Power on the server.

The AC POWER lamps go on.

 

8. 

Confirm, by the STATUS lamp or on the POST screen, that there are no errors related to
the power supply units.

See Chapter 8 for details on the error messages.

If the AC POWER lamps are off, reinstall the power supply units. If the same error
message still appears, contact your sales representative.

Power cord for
power supply unit 1

Power supply unit 1

(Standard)

Power supply unit 2

(Option)

Power cord for
power supply unit 2

Содержание N8100-958F



























































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды