manualshive.com logo in svg

NEC N8100-1005F, Руководство пользователя

Поделиться
Скачать
NEC N8100-1005F Скачать руководство пользователя страница 48

2-20  General Description

CD-ROM Drive

Your server is provided with the CD-ROM drive on its front to read data from a CD-ROM (read-
only compact disk).    The CD-ROM provides larger and faster data read than the floppy disk.

CAUTION

Observe the following instructions to use the server safely.    Failure to follow
these instructions may cause a fire, personal injury, or property damage.    See
pages 1-3 to 1-8 for details.

■

 

Do not leave the tray ejected from the CD-ROM drive.

■

 

Take off the headphone before you plug in the headphone jack.

Setting and Removing the CD-ROM

Make sure that the server is powered (the POWER/SLEEP lamp is lit) before inserting a CD-ROM
into the CD-ROM drive.

Press the Open/Close button on the front of the CD-ROM drive to eject the tray.    With the CD-
ROM label facing up, place a CD-ROM in the tray gently and securely.

Press the Open/Close button or gently push on the tray front.    The tray is automatically retracted
into the CD-ROM drive.

Open/Close button

Содержание N8100-1005F



























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды