NEC N8100-1005F, Руководство пользователя

Страница: 230 / 314

9-20 Upgrading Your Server
Slots to install the PCI board
PCI Slot
#1 #2 #3 #4 #5
Product name
PCIe 64-bit /
100MHz
32-bit /
33MHz
Slot size
(Full-height or LowProfile) Full-height
Supported board type – 3.3V 3.3V/5V
N code
Available board size Short Long Long Short Long
Note
N8503-56F SCSI controller –
√ √ √ √
N8103-65F SCSI controller –
√ √ √ √
N8103-75F SCSI controller –
√ √ √ √
N8103-80F Disk array controller –
√ √ √ √
N8103-78F Disk array controller (SATA) –
√ √
– –
Max. 1
(total)
N8104-84 1000BASE-SX adapter –
√ √ √ √
N8104-103 1000BASE-T adapter –
√ √ √ √
N8104-113 1000BASE-T adapter –
√ √ √ √
N8104-111 100BASE-TX adapter –
√ √ √ √
Max. 4
N8104-86 100BASE-TX adapter (2 ports) –
√ √ √ √
Max. 2
√
: Available, –: Unavailable
Installation Considerations for RAID Controller
Described below must be considered when installing any of the RAID controller listed below. For
details, refer to the manual that comes with the RAID controller.
– N8103-78F SATA Disk array controller
– N8103-80F SCSI Disk array controller
„
Prepare the hard disk drives and cables appropriate to RAID controller to be installed.
„
Configure the Logical Settings of hard disk drive.
„
Prepare the number of hard disk drives required for desired RAID (Redundant Array of
Inexpensive [Independent] Disks) level.
„
Making hard disks in the disk array configuration or changing the RAID level initializes
hard disks. If the hard disk to be configured in the array has your valuable data stored,
make sure to make a backup copy of the data in another hard disk before installing the
disk mirroring controller board and configuring the array.
„
Use hard disks of the same capacity and revolution for each pack to configure them in the
array.
„
The disk array configuration improves disk reliability but provides a smaller disk capacity
than the total capacity of hard disks in the disk array configuration.
„
When the disk array controller board is replaced, restore the disk array configuration
information in the disk array controller board. Use the configuration utility for the
restoration. Chapter 6 for details.