manualshive.com logo in svg

NEC N8, Руководство по обслуживанию

Поделиться
Скачать
NEC N8 Скачать руководство пользователя страница 7

NEC Confidential & Proprietary

 

Hazardous Waste:

 
 

The battery pack, if incorrectly disposed of, is an environmental hazard.  It must be
disposed of in accordance with the regulations of the country concerned.

 

Never dispose of the battery pack in fire or water.

 

 

Confidentiality:

 
 

The circuitry within this equipment contains several components that are regarded as
company confidential.  Only use NEC specified parts as replacements.

 

 

RF Injury:

 
 

To avoid RF injury, direct exposure to radio frequency energy should be avoided.  In

particular, exposed parts of your body (especially the eyes and face) should not come
into contact with the antenna while the equipment is transmitting.

 

 

Storage Conditions:

 
 

It is recommended that the following storage conditions should be avoided to prevent
damage to the equipment: -

 

Dusty.

 

Humid.

 

Near to magnetic equipment 
In direct sunlight

 

.

 

Ventilation:

 
 

Repair areas should be well ventilated and fume extraction systems should be installed
where necessary.  Potential hazardous substances are solder fumes, flux, alcohol etc.

 

 

PCB Handling:

 
 

It is recommend that cotton gloves are worn during repair work.  This is to protect your

hands from chemical contamination and to protect the PCBs from fingerprints and
humidity.

 

 

SIM Card:

 

•

 

Do not bend.

•

 

Clean by using a soft dry cloth.

Содержание N8























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды