N6602
Mobile Phone Uesr Manual
第
27
页
will always show the actual setup.
4.3.1
Call Divert
The call transfer is used to transfer calls to the desired phone according to requirements.
When carrying out the setup of call transfer, the success of setup is depended on network and SIM card.
Mobile phone will prompt suitably with the setup.
When setting up the option, ask you input the correct phone number to transfer the call correctly to the
desired phone. If there is no, please check the transferred phone number is correct or not in mobile phone.
Unconditional
When the option is set up, all calls will be transferred to the desired number.
Busy
When the option is set up, transfer the call to the desired number when your mobile phone is busy.
No Reply
When the option is set up, transfer the call to the desired number when you do not answer the call.
Cancel
When the option is set up, transfer the call to the desired number when you are not in service area
(when the network signal is not good or the signal environment is very poor).
Cancel
Select the call transfer, press
Enter
or
OK
to delete the transfer, and press Return to back the last
menu.
Status
Check the state of all current call transfer options.
4.3.2
Call Waiting
The option is to control whether permitting the call wait or not. If the option is closed, the third part will
listen the busy tone when calling the busy phone.
4.3.3
Auto Redial
The option is to control whether permitting to recall automatically or not. If the option is closed, the phone
cannot recall automatically when not putting through.
4.3.4
Auto Answer
The option is to control whether permitting to answer automatically or not.
4.3.5
Flip Answer
When permitting to call or not, fold the cover to receive the call.
4.3.6
Anykey Answer
Permit to press any key (except the key of Power) for receiving the call. If close the option, receive the call
only by other modes.
4.3.7
Minute tone
Set up the open or close of minute prompt. If the function is started, there will be minute prompt in the
process of call. If closed, then there is no minute prompt at all.
