N6206
User manual
第
28
页
4.4.4
Quick dial
“Quick dial” can be set in the mobile phone. This is to use the number key of 2~9 to represent different
phone number. When using on the idle screen, long press some certain number of 2~9 to dial the
corresponding number. If the number key is not set with the phone number, the mobile phone will prompt
“Phone number is empty”.
After enter the screen of setting the quick dial, there is different prompt for various situation of setting
quick dial according to the number key selected. If the number key has been set as quick dial, the bottom of
mobile phone will display the number and contact person specified; if not, it will display “Not bind”.
Select
Delete
to delete the existed number and reset the new number.
When setting the new number, using the way of inputting the numbers manually or browsing the
phonebook to obtain the desired number, and put it into the specified number key of quick dial for
convenient use. After completing, the mobile phone will automatically determine that the selected number
exists in the phone or not. If strange, only the number is displayed to give you the correct prompt as possible.
When the number key with the cursor is set as quick dial, the current icon is
; if the cursor does not
exist the specified key of quick dial, the current icon is
.
4.4.5
Minute tone
“Minute tone” is to set the minute prompt on off. If it is on, there will be minute prompt in the process
of call. If off, then there is no minute prompt at all.
4.4.6
Call filter
Call filter can provide you with the prevention from disturbed calls, which has “White list” and “Black
list”
。
“Black list” is to save your undesired calls
（
30 persons are most
）。
“White list” is to save your
desired calls
（
30 persons are most
）。
Only one item can be enabled once.
4.4.7
Send my number
“Send my number” is to select whether displaying your own phone number on the phone of other side or
not. The function needs the support of the network provider.
Note:
the function needs the support of the network.
4.4.8
IP code
IP code setting
：
input IP code needed
，
the preset code is “17951” without setting
，
and the effect is
same with normal call
。
4.5
Security
The menu of “Security” includes the following settings: PIN
、
Phone lock
、
PIM
、
Change password
、
Bar calls
。
