N5106 User manual
Page 35
example, when the third part is calling and it hears the busy tone.
4.4.3
Auto redial
“Auto redial” is to set whether permitting to redial automatically or not. Select
On
the system will redial
when the dialed call does not get through; select
Off
the system will not redial when the dialed call does not
get through.
4.4.4
Quick dial
“Quick dial” can be set in the mobile phone. This is to use the number key of 2~9 to represent different
phone number. When using on the idle screen, long press some certain number of 2~9 to dial the
corresponding number. If the number key is not set with the phone number, the mobile phone will prompt
“Phone number is empty”.
After enter the screen of setting the quick dial, there is different prompt for various situation of setting
quick dial according to the number key selected. If the number key has been set as quick dial, the bottom of
mobile phone will display the number and contact person specified; if not, it will display “Not bind”.
To bind the number, tap
OK
to enter the number editing screen for inputting the number manually or
get the number from phonebook.
To cancel the binding, tap
Delete
or press
OK
to delete the binded number, and then it will prompt.
If a quick dial set, number icon is
. I
f no, icon is
4.4.5
Minute tone
“Minute tone” is to set the minute prompt on /off. If it is on, there will be minute prompt in the process
of call. If off, then there is no minute prompt at all.
4.4.6
Call filter
Call filter can provide you with the prevention from disturbed calls, which has “White list” and “Black
list”
。
“Black list” is to save your undesired calls
(
30 persons are most
)。
“White list” is to save your
desired calls
(
30 persons are most
)。
Only one item can be enabled once.
4.4.7
Send my number
“Send my number” is to select whether displaying your own phone number on the phone of other side or
not. The function needs the support of the network provider.
Note:
the function needs the support of the network.
4.4.8
IP code
IP code setting
:
input IP code needed
,
the preset code is “17951” without setting
,
and the effect is
same with normal call
。