NEC N411I - MANUAL 2, Руководство пользователя

Страница: 38 / 93

24
Settings (M1)
Security (M17)
☛
1 7
The security settings will help to protect your phone from improper and unauthorized use. You may be required to enter one of the five codes (shown
below). When the phone prompts you for one of these codes, key in the appropriate number.
•
PIN code (provided by your network service provider to protect your SIM card if it is stolen)
•
PIN2 code (provided by your network service provider for charge information and Fixed dialling services protection)
•
PUK code (personal unblocking key in case you forget PIN code)
•
PUK2 code (personal unblocking key in case you forget PIN2 code)
•
Security code
,
If you forget any of these codes, ALWAYS contact your service provider as they are the ONLY source for your codes.
PIN code
Your phone can be set up so that your PIN code must be entered at power up before the phone can be used at all. If the PIN code is not entered, not
even incoming calls can be answered. Entering your PIN code incorrectly 3 times (not necessarily in the same session) will invalidate the correct PIN
code. In such a case you will have to contact your service provider for a PUK code to unblock your SIM card.
2
Some SIM cards are set up so that PIN number entry cannot be turned off.
2
When SIM PIN lock is enabled, you can change the PIN code.
PIN2 code
Your phone supports advanced feature that may require a PIN2 code to be entered before they can be accessed or modified. Entering your PIN2 code
incorrectly 3 times (not necessarily in the same session) will invalidate the correct PIN2 code. In this case you will have to contact your service provider
for a PUK2 code.
,
The PIN2 code is SIM card related and may only be available from your service provider.
No. Security
1 Change PINs Changes the PIN or PIN2 code (PIN activate setting must be turned on to change the PIN code).
2 PIN activate Turns on/off the PIN code entry required at starting up the phone.
3 Change
security code
Changes the security code which is used to set some of functions and unlock the Personal Information Manager (PIM)
features.
2
The default setting of the security code is “0000”.
4 Phone lock Turns on/off the Phone lock function which will lock the phone: you can only make emergency calls or enter the security code.
After entering the correct security code, you can use the phone normally.
2
Upon power-up, you are prompted to enter the security code if the Phone lock was active when the phone was powered down.