NEC N411I - MANUAL 2, Руководство пользователя

Страница: 23 / 93

9
Basic Calls & Phone Use
Putting a call on hold
☛
To put the received or dialled call on hold, SK1 or 2 . To retrieve the call, SK1 or 2 again.
Mute
You can mute the sound from the mouthpiece during a call. When your call is muted, the other party cannot hear any sound from your phone, but you
can still hear the sound from the other party.
☛
To mute the sound during a call, 3 . To retrieve the sound, 3 again.
2
The mute function is automatically released after the call ends.
2
The mute function is not available while using the headset.
Call transfer
When you have an active call and a held call, you can transfer the call and connect the two parties, then you can drop from the line while leaving those
two calls active.
☛
To transfer the call, 4 .
2
After dropping from the call with the other two parties, if you have a call waiting, you can proceed the call with it.
,
Call transfer facility is SIM dependent.
Multi-party calls
If your SIM card is multi-party enabled, you can make a conference call to more than one caller. To create the multi-party calls, at least 3 parties, including
the host, are needed.
Receiving the second call
☛
SK1 or to accept the second call ➔ SK2 or 5 to merge both calls to initiate a multi-party call.
2
When you accept the second call, the first call will be put on hold.
Making the second call
☛
SK1 to put the first call on hold
➔
Key in the phone number
➔
SK1 or to make the second call
➔
After the second participant answers, SK2
or 5 to merge both calls to initiate a multi-party call.
Putting the multi-party calls on hold
☛
SK1 or 2 to put all calls on hold ➔ To retrieve the call, SK1 or 2 again.
2
You can put the multi-party calls on hold only when you are a host of the multi-party calls.