22
SIGNAL ENTRY
2) Input the source name by selecting one character at a time with
the INPUT buttons 1 through 10 and by moving the cursor with
the CURSOR
button. After finishing the selection of the
characters, press ENTER.
• Up to eight characters can be selected.
• Eight characters are assigned to one INPUT button.
• Whenever the INPUT button is pressed, characters will be rotated.
For example:
A
→
B
→
C
→
1
→
A .....
• When pressing the INPUT button while holding down the CTL
button, another group of characters will be rotated.
For example:
a
→
b
→
c
→
!
→
a .....
• The characters corresponding to these INPUT buttons are as
follows:
When using With CTL
INPUT 1
A, B, C, and 1
a, b, c, and !
INPUT 2
D, E, F, and 2
d, e, f, and “
INPUT 3
G, H, I, and 3
g, h, i, and #
INPUT 4
J, K, L, and 4
j, k, l, and $
INPUT 5
M, N, O, and 5
m, n, o, and %
INPUT 6
P, Q, R, and 6
p, q, r, and &
INPUT 7
S, T, U, and 7
s, t, u, and ‘
INPUT 8
V, W, X, and 8
v, w, x, and (
INPUT 9
Y, Z, ?, and 9
y, z, /, and )
INPUT 10
*, ,, ., and 0
;, :, +, and -
• If you have made an error in the input of a character, use the
CURSOR button and enter the correct letter or number.
To delete one character, move the CURSOR
button to the
character to be deleted and then press the NORMAL button.
To delete all the entered name, hold down the CTL button then
press NORMAL.
• The “INITIAL DATA SELECT” menu will be displayed.
– – – – – – – –
N A M E I N P U T
Items to select
•
VIDEO ---------- Selects the signal from the VIDEO input
terminal of the VIDEO input board.
•
RGB ------------ Selects the signal from the RGB input terminal
of the RGB input board.
•
S-VIDEO ------- Selects the signal from the S-VIDEO input
terminal of the VIDEO input board.
•
COMPO. -------- Selects the signal as COMPONENT signal from
the RGB input terminal of the RGB input board.
• Go on to Step 2).
NOTE: Signal registry is not possible unless the installed input board
matches the selected signal. Check if the installed input board
matches the slot number.
