NEC MultiSync V323-3 Скачать руководство пользователя страница 11

Страница: 11 / 44

English-9

English

Terminal Panel

From option control unit

AC IN connector

Connects with the supplied power cord.

Main Power Switch

On/Off switch to turn main power ON/OFF.

LAN port (RJ-45)

LAN connection. See page 32.

RS-232C (D-Sub 9 pin)

IN connector:

Connect RS-232C input from external

equipment such as a computer in order to control RS-232C
functions.

OUT connector:

Connect RS-232C output. To connect

multiple MultiSync monitors via RS-232C daisy Chain.

REMOTE IN

Use the optional wired remote control by connecting it to your
monitor.

NOTE:

When you use Remote IN, IR CONTROL in OSD

menu should be NORMAL.

NOTE:

Do not use this connector unless specified.

AUDIO OUT

To output the audio signal from the AUDIO IN 1, DPORT and

HDMI to an external device (stereo receiver, amplifier, etc.).

NOTE:

This connector is not a headphone terminal.

AUDIO IN 1

To input audio signal from external equipment such as a

computer, VCR or DVD player.

VGA IN (mini D-Sub 15 pin)

To input analog RGB signals from a personal computer or
from other RGB equipment. This input can be used with an
RGB, COMPONENT, SCART, VIDEO or S-VIDEO source.
Please select signal type in TERMINAL SETTING.
See page 25.

NOTE:

When you use this connector for COMPONENT,

SCART, VIDEO or S-VIDEO, please use a suitable signal
cable. If you have any questions, please ask your dealer.

Option board slot

Slot 2 type accessories are available. Please contact your
supplier for detailed information.

NOTE:

Please contact your supplier for available option

board.

DISPLAYPORT connector

To input DisplayPort signals.

HDMI connector

To input digital HDMI signals.

DVI connector (DVI-D)

IN connector:

To input digital RGB signals from a computer

or HDTV device having a digital RGB output.
* This connector does not support analog input.

OUT connector:

To output the DVI signal from DVI IN or

HDMI with DVI signal input. (DVI signal only, HDMI signal is
not thorough out).

Security Slot

Security and theft protection lock slot compatible with

Kensington security cables/equipment.

For products, visit Kensington’s website.

Internal speaker

Rating label

Содержание MultiSync V323-3













































Результаты поиска

Содержание MultiSync V323-3

Отзывы:

Похожие инструкции для MultiSync V323-3

Бренды по названию

Популярные бренды

NEC MultiSync V323-3, Руководство пользователя

Результаты поиска

Содержание MultiSync V323-3

Отзывы:

Похожие инструкции для MultiSync V323-3

Бренды по названию

Популярные бренды