NEC MultiSync UX552, Руководство по установке

Страница: 22 / 25

English
- 22
Screws are at the top.
Screws are un-removable.
Insert solderless terminal here.
Tighten screw.
Warning
Tighten the terminal screw in the torque range of 0.8Nm~1.2Nm.
Even if the screws are too loose or too tight, there is a possibility of serious accident. Be sure to observe the torque range.
(5) Install “DC plate” by screw
.
Standards JIS IEC/EN UL/cUL
Wire size 2mm^2 2~2.5mm^2
AWG14~22(FW2)
Terminal screw M3.5 x 8
Tightening torque 0.8~1.2Nm
Solderless terminal R2-3.5, R1.25-3.5, R0.5-3.5
Solderless terminal Size